Revelator 1" Tweeter
Scan-Speak
Type Number:D2905/990000


Features

The Revelator series has for years been celebrated for producing the best sounding electro dynamic transducers in the world. Since Scan-Speak was founded in 1970, the audio engineers and R&D experts working on the line have been on a quest to create drivers that reveal all the sound in recordings, hiding nothing from the listener. This quest has resulted in several revolutionary inventions that remove distortion in the magnet systems and in the moving parts of the speaker. The philosophy is that the sound has to be very dynamic, giving a perfect transient response and providing tonal balance.

In the Revelator tweeters, additional enhancements have been made to reduce distortion and power compression, and to optimize airflow in the chambers, producing several unique tweeter designs.

Driver Highlights: 1" soft dome, SD-2 motor, low compression design, non resonant chamber, machined aluminium faceplate

PDF



Specs

Electrical Data
Nominal Impedance Zn 6 ohm
DC Resistance Re 4.7 ohm
Voice Coil Inductance Le 0.01 mH
TS Parameters
Resonance Frequency fs 500 Hz
Force Factor Bl 3.5 Tm
Moving Mass Mms 0.45 g
Effective Piston Area sd 8.5 cm^2
Sensitivity 2.83V/1m 91 dB
Power Handling
100h RMS noise test IEC 225 W
Voice Coil and Magnet Parameters
Voice Coil Diameter 28 mm
Linear Excursion +/- 0.4 mm
Max mech. excursion +/- 1.5 mm


Frequency



Mechanical Dimensions

Drawing Dimensions
Outside Diameter OD 130 mm
Magnet Diameter MD 73.5 mm
Interior Depth ID 49 mm
Hole Diameter HD 5 mm
Screw Circle Diameter SD 110 mm